Nobody walks into high care without changing.
The Food Processing pack switches on 37 concerns, 28 detected today. Dirty-to-clean crossings, allergen areas and cold rooms are watched alongside the exits and panels.
Gulf Foods · Plant 2 / Overview
Day shiftGood morning. Here is where the site stands.
Safety score
84
Grade B
Hygiene crossings
6
High-care entry
Cold room checks
1
Person alone, checked
Blocked minutes
19
Dispatch exit
Open events
- P2Dirty-to-clean zone crossing without changecam-09High-Care Entry · Hygiene lead07:12
- P2Person alone in cold roomcam-12Cold Room 1 · Shift lead13:40
- P3Walkway obstructedcam-04Dispatch Aisle · Warehouse lead8 min
The challenge
- 01
Straight from the yard
"People walk from the yard into the high-care area without changing."
- 02
Allergen areas
Staff cross into allergen-controlled areas from the general line during busy changeovers.
- 03
Alone in the cold room
Someone working alone in the cold room is invisible to the rest of the shift.
A typical event, handled
The camera catches it, the zone rule decides, the owner is told in seconds, and the event closes when the camera sees it cleared.
- Crossing without change
- Send to changing area
What COM8 Vision watches in Food Processing
- Housekeeping & HygieneWalkways kept clear of material that arrives and stays, and the crossings between dirty and clean areas watched.
- Access Control & ZonesPeople where they should not be: hazard zones, restricted rooms, machine guards, robot cells and confined spaces, each with a named owner.
- Emergency ReadinessEmergency exits, escape routes, assembly points and the kit people reach for in an emergency, kept clear and timed when they are not.
- Electrical & EnergyOne-metre clearances in front of electrical panels kept clear, and unauthorised people kept away from live equipment.
What the pilot is judged on
- 3wks
- From signing to alerts going live
- 0
- New cameras or re-cabling needed
- ↓
- Blocked minutes at your emergency exits
- ↓
- Near misses between people and vehicles
The pilot
Live on your own cameras in about three weeks
A paid four-week pilot on about ten cameras, judged on one number your team already cares about: how long the emergency exits stay blocked.
- 01
Day one
Discovery call
A 45-minute call to pick the cameras that matter: exits, vehicle routes, panels and PPE areas, and who owns each one.
- 02
Week 1
IT request
Your IT team creates a read-only account on the recorder and gives the edge box one switch port. No port forwarding, no inbound connections, no recording changes.
- 03
Week 1
Install
Half a day on site. The box is online about ten seconds after the installer runs, and ten cameras take about ten minutes to add.
- 04
Week 1
Zone workshop
Two hours with your HSE lead to draw 10 to 20 zones, each with a named owner. You can redraw them yourself afterwards.
- 05
Weeks 1–2
Shadow mode
Two weeks of events with no alerts, so the zones and thresholds are tuned on your site before anyone gets a notification.
- 06
Week 4
Review
Alerts go live for exactly two concerns, then a one-hour review of blocked minutes, near misses and the scorecards, worst first.
Put your industry pack on your cameras
A four-week pilot on about ten of your existing cameras, with zones drawn and owned by your own team.
Frequently asked questions
No. A pack is a starting point, not a licence boundary. Every concern in the catalogue stays available, nothing is charged per concern, and the score formula is the same in every pack.
Not yet. Hairnet and apron detection is on the roadmap. Crossings between dirty and clean zones are detected today.
COM8 Vision uses the cameras you already have. If they cover the area, the zones can be drawn on them.