Skip to content
New102 named safety concerns, 12 industry packs

AI CCTV that tells you who owns the problem.

COM8 Vision watches the cameras you already have. It flags blocked exits, people in vehicle routes and missing PPE, and times how long each one lasted. Every point your site loses has a zone, a shift and a named owner behind it.

  • The cameras you have
  • A score you can defend
  • A name on every point

This is the COM8 Vision dashboard with sample data. Click around, every page works.

Main Contractor · Al Quoz Site / Monitor / Overview

Wednesday 23 September · last 24 hours

Good morning, Priya. The site is a B today.

Every tile drills through to the events behind it. 9 of the 13 points lost are Emergency Readiness, most of them one exit.

Safety score

87

Grade B · up 4 on yesterday

Open critical events

2

Exit blocked, vehicle near pedestrian

Blocked minutes

41

Exit · extinguisher · panel · housekeeping

Near misses

3

All on Yard Drive Lane

Live event feed

  • P1Emergency exit blockedcam-03Store Emergency Exit · Priya Nair6 min
  • P1Pedestrian too close to vehiclecam-02Yard Drive Lane · Ahmed Al Balushi09:14
  • P2Electrical panel access blockedcam-01DB-3 Electrical Panel · Beta Steel4 min

Trusted by the region's
leading businesses

  • EMAAR
  • ADNOC
  • enoc
  • NAKHEEL
  • DAMAC
  • Dubai South
  • Dubai Airports
  • Dubai Properties
  • Emarat
  • Copart
  • Joseph Smart Solar
  • Falcon Pack
  • Alokozay
  • SignArt Pro
  • Art Source
  • wenodo

Product overview

See how COM8 Vision works

A short look at a site running COM8 Vision: zones drawn on the real camera frame, events with an owner and a duration, and the score that comes out of them.

On the edge box

What runs next to your recorder

Detection, tracking and blur, all on site

How Live Monitoring works

How it works

Every camera watched, every problem timed and given an owner

  • 01

    Exits that stay clear

    Material left in front of an emergency exit is caught as it arrives and timed until it goes. The owner hears about it in seconds, not at the Friday walk.

    Critical event · Owner Priya Nair · 6 blocked minutes

  • 02

    People and vehicles kept apart

    Distances are measured on the calibrated ground plane, not guessed from pixels. Every near miss lands on the shift and the route where it happened.

    Near miss · 2.4 m for 3 s · Day shift

  • 03

    PPE where it is required

    Hard hats are checked inside the zones you mark as PPE mandatory, and the event goes to the subcontractor working that zone.

    No hard hat · Owner Alpha MEP · Toolbox talk

  • 04

    Fixes the camera confirms

    A persistent condition is closed only when the camera sees it cleared. Nobody has to remember to tick a box, and nobody can tick it early.

    Auto-cleared by the camera · 41 minutes counted

Capabilities

From a camera frame to a number
you can defend on Monday

COM8 Vision draws the rules onto your own cameras, times every condition, and shows the arithmetic behind every point your site loses.

Zones Drawn on the Real Frame

Exits, routes, panels and PPE areas, each with an owner. Re-map a camera in ninety seconds

Published Safety Score

Severity × duration ÷ person-hours. No black box

Blocked Minutes

Timed from arrival to clear, verified by the camera

Scorecards, Worst First

Per supervisor, subcontractor, zone and shift, with the events behind every score

Every Site on One Screen

One formula across sites, so scores compare fairly

Industries

One dropdown sets up the concerns
your industry is inspected on

Construction

Put a name on every point lost with Scorecards & Actions

See the Construction pack

The pilot

Live on your own cameras in about three weeks

A paid four-week pilot on about ten cameras, judged on one number your team already cares about: how long the emergency exits stay blocked.

  1. 01

    Day one

    Discovery call

    A 45-minute call to pick the cameras that matter: exits, vehicle routes, panels and PPE areas, and who owns each one.

  2. 02

    Week 1

    IT request

    Your IT team creates a read-only account on the recorder and gives the edge box one switch port. No port forwarding, no inbound connections, no recording changes.

  3. 03

    Week 1

    Install

    Half a day on site. The box is online about ten seconds after the installer runs, and ten cameras take about ten minutes to add.

  4. 04

    Week 1

    Zone workshop

    Two hours with your HSE lead to draw 10 to 20 zones, each with a named owner. You can redraw them yourself afterwards.

  5. 05

    Weeks 1–2

    Shadow mode

    Two weeks of events with no alerts, so the zones and thresholds are tuned on your site before anyone gets a notification.

  6. 06

    Week 4

    Review

    Alerts go live for exactly two concerns, then a one-hour review of blocked minutes, near misses and the scorecards, worst first.

Trust & privacy

Faces blurred on site. No video leaves it.

Events only. No face recognition. No per-worker score.

The edge box blurs every face before anything leaves your network. The dashboard receives structured events and one blurred still per event, never a video stream. Your recorder keeps recording exactly as it does today.

  • Faces blurred on the edge box, in the live view and every still
  • Read-only on your recorder, nothing written back, ever
  • No face recognition, no per-worker score, by design
  • Faces blurred
  • Your cameras
  • Read-only
  • Edge box
  • No inbound ports
  • Events only
  • Roles per site
  • No face ID
  • Published score

Find out how long your fire exits were blocked

Four weeks, about ten of your own cameras, and a scorecard with names on it. No new cameras, no video leaving site.

Frequently asked questions

  • It connects to the cameras and recorder you already have, watches the zones you draw on each camera, and turns what it sees into events with an owner, a duration and a recommended action. Those events roll up into a published safety score per site, zone, shift, supervisor and subcontractor.

  • No. COM8 Vision reads the live sub-streams from your existing Hikvision or Dahua recorder with a read-only account. Your recorder keeps recording exactly as before, and nothing is re-cabled.

  • No. Detection runs on a small edge box on your network. Faces are blurred on the box, and only structured events and one blurred still per event are sent to the dashboard. No raw video leaves the site.

  • With a published formula. Each event costs points by severity, multiplied by how long it lasted, and the total is divided by the person-hours the cameras observed. Every point lost opens the events behind it, so you can explain the number to anyone.

  • The catalogue names 102 safety concerns across 13 categories. 57 are detected by the cameras today, such as blocked emergency exits, people in vehicle routes, restricted-zone entry, blocked panels and extinguishers, and missing hard hats. The rest can be reported manually in two clicks until detection ships.

  • No, and that is a product commitment. There is no face recognition and no per-worker score. Accountability sits with zones, shifts, supervisors and subcontractors.

  • About three weeks from signing. A half-day install, a two-hour zone workshop with your team, then two weeks in shadow mode before alerts switch on for the first two concerns.